Weider Pro 6900 User Manual page 14

18. Apply grease to an M8 x 22mm Shoulder Bolt
(65).
Attach the Arm Cable (54) to the right Cable
Pivot (39) with the M8 x 22mm Shoulder Bolt
(65) and an M8 Locknut (58).
18
Grease
65
19. Identify the Low Cable (53). Route the Low
Cable through the Leg Lever (8) and the Front
Leg (7).
Attach a Thick Pulley (48) inside the Leg Lever
(8), above the Low Cable (53), with an M10 x
67mm Bolt (71), two M10 Washers (57), two
13mm Spacers (52), and an M10 Locknut (56).
19
48
53
20. Attach a Thick Pulley (48) inside the Front Leg
(7), above the Low Cable (53), with an M10 x
67mm Bolt (71), two M10 Washers (57), two
13mm Spacers (52), and an M10 Locknut (56).
20
56
48
14