Assembling The Printer - Epson AcuLaser C8600 Setup Manual

2

Assembling the Printer

Before assembling the printer, follow the instructions on the
Unpacking Sheet to remove all protective materials packed around
and inside your printer.
Note:
Keep all packing materials as you will need them when transporting the
printer.
Installing the Face-Up Tray
Follow these steps to install the face-up tray onto the left side of
the printer.
1. Locate the output slot on the left side of the printer.
2. Install the face-up tray as shown below.
c
10
Assembling the Printer
Caution:
Do not insert the metal spring into the output slot or any
holes in the printer case. Doing so may damage the face-up
tray or your printer.
metal spring