Installing An Interface Card - Epson AcuLaser C8600 Setup Manual

Installing an Interface Card

Your printer comes with a Type B interface slot. Various optional
interface cards are available to expand your printer's interface
options.
Note:
Mac OS 8.5.1 to 9.X supports the Type B IEEE 1394 Interface Card
(C12C82372 ). It can be connected to a Macintosh
Follow these steps to install an optional interface card.
Caution:
c
Before you install the interface card, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
1. Make sure the printer is not turned on, and that the power
cord is unplugged.
2. Be sure to set any switches and jumpers on the card, as
necessary. See the interface card's manual for details.
3. Remove the screws as shown below and remove the cover.
Note:
Keep the slot cover in a safe place. You will need to reattach it if you
remove the interface card later.
26
Installing Options
® ®
FireWire port.