g
Refer to steps
(Connecting Three Patterns)" to embroider
the first pattern and re-hoop the fabric.
h
Select the pattern, and then press
i
Press
in the pattern editing screen.
j
Rotate the pattern to the same angle as the
first pattern, and then press
k
Press
settings screen.
l
Select the reference edge and reference point
corresponding to those for the first pattern,
and then press
28
e
k
through
of "Practice
.
to display the embroidery
.
.
a
Reference edge and reference point
m
Continue with step
(Connecting Three Patterns)" to finish
connecting the patterns.
Changing the Reference Edge and
Reference Point for Connecting the
Next Pattern after a Pattern has been
Embroidered
The reference edge and reference point for connecting
the next pattern can be changed after a pattern has been
embroidered.
a
Pattern1.pes
b
Pattern2.pes
a
n
of "Practice