Brother Entrepreneur Pro PR-1000 Operation Manual page 19

n
Select the area containing one of the two
stickers, and then press
→ The camera detects the two marks.
Note
• To return to the embroidery settings screen, press
. Pressing
the pattern connection setting screen (screen for
connecting the selected pattern to the previous
one), where the reference edge and reference point
can be selected.
• If the following message appears, press
and then re-hoop the fabric so that the centers of the
large circles of the positioning stickers are within the
embroidering area or hoop the fabric in a larger
embroidery frame. After checking that the area
containing one of the two stickers have been
correctly selected in step
The message above also appears when the
positioning sticker is too closely attached to the
perimeters of the embroidering area. In that case,
re-hoop the fabric so that the stickers fit more within
the embroidering area.
18
.
, then displays
,
n
, press .
• If the following message appears, press
and then re-hoop the fabric so that the pattern and
the centers of the large circles of the positioning
stickers are within the embroidering area or hoop
the fabric in a larger embroidery frame.
If the positioning stickers do not fit within the
embroidering area, press
shown below.
Next, press , then
pattern connection setting screen.
Refer to "Changing the Position of a Sticker" on
page 21 to reposition the sticker.
• If the following message appears, press
return to the pattern editing screen. Check the
pattern size and pattern connection settings, and
then repeat the previous steps.
,
in the screen
to display the
to