The Remaining Service Life Of The Consumables Is Not Updated (For Windows Users Only); Printout Problems; The Font Cannot Be Printed - Epson AcuLaser C9200 Series User Manual

Cause
For Windows users, EPSON Status Monitor is not
installed.
For Macintosh users, you do not re-register the printer.
The remaining service life of the consumables is not updated (For Windows
users only)
Cause
The interval between updating information for the
consumables is too long.

Printout Problems

The font cannot be printed

Cause
For Windows users, you may use the printer fonts
substituted for specified TrueType fonts.
The selected font is not supported by your printer.
EPSON AcuLaser C9200 Series
What to do
For Windows users:
You have to install EPSON Status Monitor, or make settings
manually in the printer driver. See "Making Optional Settings" on
page 217.
For Macintosh users:
When you have attached or removed options from the printer,
you need to start EPSON Status Monitor, or delete and re-register
the printer.
To delete the printer, use Print & Fax (for Mac OS X 10.5) or Printer
Setup Utility (for Mac OS X 10.4 or below).
For Mac OS X 10.5 users, you can make the settings manually. Click
the Options & Supplies button in Printer & Fax, select the Driver
tab, to make the settings manually.
What to do
Press the Get Information Now button on the Consumable Info
Settings dialog box. You can also change the interval for updating
information about the consumables on the Consumable Info
Settings dialog box.
What to do
In the printer driver, choose the Print TrueType fonts as bitmap
check box in the Extended Settings dialog box.
Make sure that you have installed the correct font. See the Font
Guide for more information.
User's Guide
Troubleshooting 197