Accessing The Postscript Printer Driver - Epson AcuLaser C9200 Series User Manual

4. Follow the instructions as appropriate below to select your printer.
AppleTalk
Select your printer from the Name List, then select Auto Select from the Printer Model List.
IP Printing
Select Epson from the Name List, then select your printer from the Printer Model List.
USB
Select your printer from the Name List, then select your printer from the Printer Model List.
Note for Mac OS X 10.4 or below users:
If ESC/Page driver is not installed, your printer model is automatically selected in the Printer Model
List when you select your printer from the Name List while the printer is on.
Bonjour (Rendezvous)
Select your printer, the printer name is followed by (PostScript), from the Name List. Your
printer model is automatically selected in the Printer Model List.
Note for Bonjour (Rendezvous) users:
If your printer model is not automatically selected in the Printer Model list, you need to reinstall
the PostScript printer driver. See "Installing the PostScript printer driver" on page 244.
5. Click Add.
Note for IP Printing users, USB or Bonjour (Rendezvous) users:
Select your printer from the Printer list, then select Show Info from the Printers menu. The Printer
Info dialog box appears. Select Installable Options from the pop-up list, then make the necessary
settings.
6. Confirm that your printer's name is added to the Printer List. Then quit Print & Fax (for Mac
OS X 10.5) or Printer Setup Utility (for Mac OS X 10.4 or below).

Accessing the PostScript printer driver

You can change the PostScript printer driver settings in the PostScript printer driver. To access the
printer driver, see "Accessing the printer driver" on page 216.
Changing the printer setup settings
You can change or update the printer setup settings according to the options installed in your printer.
EPSON AcuLaser C9200 Series
About the PostScript Printer Driver
User's Guide
246