Casio Exilim EX-Z1080 User Manual page 82
Hide thumbs
Also See for Exilim EX-Z1080:
- User manual (267 pages) ,
- Catalog (10 pages) ,
- User manual (91 pages)
Table of Contents
Advertisement
The subject is out of focus in
The image may not be focused properly. When composing
the image, make sure the subject is located
the recorded image,
inside the focus frame.
The flash does not fire.
1) If "_"
(Flash Off) is selected as the flash mode, change to another mode (page 71).
2) If the battery is dead, charge it (page 36).
3) If a BEST SHOT scene that uses the "_"
(Flash Off) flash mode is selected, change to a different
flash mode (page 71) or select a different BEST SHOT scene (page 97).
Camera powers down during
The battery may be dead. Charge the battery (page 36).
self-timer
countdown.
The monitor screen image is
1) You may be using Manual Focus and have not focused the image. Focus the image (page 123).
out of focus.
2) You may be using the macro mode D
for scenery or portraits. Use Auto Focus for scenery and
portrait shots (page 116).
3) You may be trying to use Auto Focus or the Infinity mode _
when shooting
a close-up shot. Use the
Macro mode for close ups (page 117).
There is a vertical line on the
Shooting
a very brightly lit subject can cause a vertical band to appear in the monitor screen image. This is
monitor screen,
a CCD phenomenon
known as "vertical smear", and does not indicate malfunction
of the camera. Note that
vertical smear is not recorded
with the image in the case of a snapshot, but it is recorded in the case of a
movie.
There is digital noise in
1) Sensitivity may have been increased automatically
for a dark subject, which increases
the chance of
images,
digital noise. Use a light or some other means to illuminate the subject.
2) You may be attempting
to shoot in a dark location while "_"
(Flash Off) is selected as the flash mode,
which can increase digital noise and make images appear coarse. In this case, change to a different
flash mode (page 71) or use lights for illumination.
3) Flash assist or dynamic range may be enabled for snapshots,
which can cause an increase in digital
noise. Use a light or some other means to illuminate the subject.
APPENDIX
254
Advertisement
Table of Contents
