Casio Exilim EX-Z1080 User Manual page 15

I Copying a Single File from a Memory Card to
Built-in Memory
With this procedure, files must be copied one-by-one.
1. Load the memory card that contains the file
you want to copy into the camera.
2. Turn on the camera, enter the PLAY mode and
then press [MENU].
3. On the "PLAY" tab, select "Copy" and then
press [,].
4. Use [,i] and [V] to select "Card _ Built-in"
and then press [SET].
5. Use [41] and [1_] to select the file you want to
copy.
6. Use [A] and [Y] to select "Copy" and then
press [SET].
This starts the copy operation. Wait until the "Busy... Please
wait..." message disappears from the monitor screen before
performing any operation on the camera.
• The copied image reappears on the monitor screen after
the copy operation is complete.
7. Now you can repeat steps 5 and 6 to copy
another file, or you can exit this procedure by
pressing [MENU].
_NOTE
• Files are copied to the folder in built-in memory whose
name has the largest serial number.
MANAGING YOUR FILES
187