Casio Exilim EX-Z1080 User Manual page 60

I Connecting the Camera to Your Macintosh
the First Time
1. Make sure the camera's battery is fully
charged.
2. Turn on the camera, and then press [MENU].
• It makesno differencewhetherthe camera is in a REC
modeor the PLAYmode.
3. Select the "Set Up" tab, select "USB", and
then press [1_].
4. Use [A] and [Y] to select "Mass Storage", and
then press [SET].
5. Turn off the camera, and connect the USB
cable that comes bundled with the camera to
the camera's USB/AV connector and your
computer's USB port.
Making sure thatthe _1mark on the camera is aligned
withthe I_ mark of the USBcable
plug,
connect the
cable to the
camera. 4
USB Cable
I//_-__
Port
• When connecting the bundled USB cable to the camera's
USB/AV port, insert the plug into the port until you feel it
click securely into place. Failure to insert the plug fully
can result in poor communication or malfunction of the
connectedcomponents.
USING THE CAMERA WITH A COMPUTER
232