Specifying The Angle Unit And Display Format - Casio Algebra FX 2.0 User Manual

2-3 Specifying the Angle Unit and Display
Format
Before performing a calculation for the first time, you should use the SET UP screen to
specify the angle unit and display format.
k k k k k Setting the Angle Unit
1. On the Set Up screen, highlight "Angle".
2. Press the function key for the angle unit you want to specify, then press i.
• {Deg}/{Rad}/{Gra} ... {degrees}/{radians}{grads}
• The relationship between degrees, grads, and radians is shown below.
k k k k k Setting the Display Format
1. On the Set Up screen, highlight "Display".
2. Press the function key for the item you want to set, then press i.
• {Fix}/{Sci}/{Norm}/{Eng} ... {fixed number of decimal places specification}/
{number of significant digits specification}/{normal display}/{Engineering Mode}
u To specify the number of decimal places (Fix)
Example To specify two decimal places
1(Fix) cw
Press the function key that corresponds to the
number of decimal places you want to specify
( n = 0 to 9).
# Displayed values are rounded off to the
number of decimal places you specify.

Specifying the Angle Unit and Display Format

360# = 2% radians = 400 grads
90# = %/2 radians = 100 grads
2-3-1
19990401
[SET UP]- [Angle]
[SET UP]- [Display]