Performing A Data Communication Operation - Casio Algebra FX 2.0 User Manual

10-4 Performing a Data Communication
Operation
From the Main Menu, enter the LINK Mode. The following data communication main menu
appears on the display.
• {TRNS}/{Recv} ... menu of {send settings}/{receive settings}
Communications parameters are fixed at the following settings.
• Speed (BPS):
• Parity (PARITY): NONE
k k k k k Performing a Data Transfer Operation
Connect the two units and then perform the following procedures.
Receiving unit
To set up the calculator to receive data, press 2(Recv) while the data communication main
menu is displayed.
The calculator enters a data receive standby mode and waits for data to arrive. Actual data
receive starts as soon as data is sent from the sending unit.
10-4-1

Performing a Data Communication Operation

38.4 kbps (sending a data)
9,600bps (sending a screen shot)
19990401