Macintosh System Requirements - Epson 850 User Manual

Introduction
At least 50MB of free hard disk space for storing images
(100MB is recommended)
VGA, Super VGA, or better display adapter and monitor
Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software
A shielded, twisted-pair parallel cable (6 to 10 feet long) to
connect your computer to the printer; the cable must have
a D-SUB, 25-pin, male connector for your computer and a
36-pin, Centronics

Macintosh System Requirements

To use your printer and its software with a Macintosh, your
system should have:
Any Macintosh or Power Macintosh model except the
Macintosh +, Macintosh 512, Performa
®
PowerBook 100, and some early versions of the
Macintosh, such as the II or Classic
System 7.1 or later (7.5 or later recommended)
At least 16MB of RAM (20MB or more is recommended)
At least 50MB of free hard disk space for storing images
(100MB is recommended)
13-inch RGB display or better
Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software
®
Standard Apple
(RS-422, 8-pin mini DIN male/male, Belkin F2V024
recommended)
2
®
compatible connector for the printer.
System Peripheral-8 cable or equivalent
®
410,