Installing Printer Software For Windows Nt - Epson 850 User Manual

Installing Printer Software and Configuring on a Network
Installing Printer Software for
Windows NT 4.0
These instructions tell you how to install the printer software on
the Windows NT 4.0 computer that is connected directly to the
printer or all the computers that are connected remotely to the
printer via an optional network interface card.
If you'll be connecting the printer directly to a print server and
sharing access to it on the network, see your Windows NT 4.0
documentation for connection instructions for client
workstations.
1. Make sure your printer and computer are turned OFF.
2. Turn on your computer and log onto Windows NT 4.0
with the appropriate access privileges. Exit any open
application programs.
3. Insert the EPSON printer software CD-ROM or
diskette 1.
4. If you're installing from the CD-ROM, click
, and type
D :\EPSON
Run
your CD-ROM); then click
program starts, read the license agreement and click
If you're installing from diskettes, click
and type
D :\SETUP
diskette drive); then click
5. Make sure
EPSON Stylus COLOR 850
click .
OK
6. Follow the instructions on the screen to install your printer
software and your creative software (CD-ROM only). Your
printer icon now appears in the Printers folder.
7. See page B-7 for instructions on connecting the remote
printer to each system on the network using the TCP/IP
(or LPR) protocol. If you're using a different protocol, see
your Windows NT 4.0 documentation for instructions.
B-4
(where is the drive letter of
D :
. After the installation
OK
Start
(where is the drive letter of your
D :
.
OK
is selected and
, select
Start
.
Agree
, select ,
Run