Macintosh System Requirements - Epson 7500 User Manual

Macintosh System Requirements

To use EPSON Stylus RIP with a Macintosh in either a
standalone or network environment as a print server, your
system should meet the following minimum requirements:
Power Macintosh,
or G4 series
At least 16MB of available RAM for the EPSON Stylus
RIP software (20MB or more is recommended), in
addition to the RAM needed by your operating system and
other applications
At least 52MB of free hard disk space to install the software
and at least 150MB of free hard disk space for processing large
files
Macintosh Operating System 8.5.1 or later
CD-ROM drive
Serial, Ethernet, or USB connection to the printer. The
USB connection can be either a built-in USB port or the
EPSON USB Adapter kit (part number C-USB-PK4).
To set up a Macintosh as a client on a network using the
EPSON Stylus RIP, your system must have the following
minimum configuration:
Macintosh Centris,
Macintosh, iMac series, or Power Macintosh G3 or G4
series
™
Ethernet AppleTalk
up as the EPSON Stylus RIP print server
8MB RAM
At least 2MB of free hard disk space to install the software and
at least 150MB of free hard disk space for processing large files
Macintosh Operating System 7.6.1 or later
CD-ROM drive
® ™
iMac series, or Power Macintosh G3
®
Macintosh Quadra,
®
connection with the Macintosh set
3
Introduction
® ®
Performa, Power