Table of Contents
Advertisement
Determining Your Configuration
You can connect your printer and use EPSON Stylus RIP in
three different configurations:
Standalone
Direct connection network
Typical network
The standalone or direct connection network configurations are
recommended for best performance.
Note:
AppleTalk must be active in order to use EPSON Stylus RIP in any
configuration, including a standalone system.
Standalone Configuration
In a standalone system (shown below), your printer is
connected directly to your Macintosh by a standard serial, USB,
or EPSON USB Adapter cable, as shown below:
serial, USB, or
printer
EPSON USB
Adapter cable
In this configuration, you install the EPSON Stylus RIP Server
software on your Macintosh system, which then acts as both
server and client in your printing process.
Installing EPSON Stylus RIP for Macintosh
standalone
Macintosh
1-3
AppleTalk control
panel set to
Remote Only
Advertisement
Table of Contents
