Canon EOS-1DS Mark III Instruction Manual page 33

Installing and Removing the Memory Card
Memory card selection icon
Set the power switch to <ON>.
_y,, T he number of possible shots will be
displayed on the top LCD panel and
in the viewfinder.
_y,, T he rear LCD panel will indicate
which memory card(s) has been
installed. The images will be
recorded to the memory card with
the < _> arrow next to the
respective card's indicator.
® The Camera is Compatible with both Type ! and Type 11 CF Cards WhiCh
differ in thickness. High-capacitY (2GB or high®I) OF cards, SD cards,
and hard disk-type cards can also be used.
® The number of possible shots varies depending on the memory card's
Capacity, image:recording quality, iso Speed, etc.
® The [2; Shoot wto card] menu option set to [Off] will prevent you from
forgetting to install a memory card.
Removing the Card
2
Open the cover.
® Set the power switch to
<OFF>.
® Make sure the access lamp is off,
then open the cover,
Take out the memory card.
® To remove the CF card, push the
eject button.
® To remove the SD card, push it in and
release it.
® Close the cover.
33