Canon EOS-1DS Mark III Instruction Manual page 143

p$" Printing
_ et the date and file number
imprinting.
® Set as necessary.
® Turn the <O> dial to select <Qj>,
then press < _:>.
® Turn the <0> dial to select the
desired setting, then press < :_>.
Set the number of copies.
® Set as necessary.
® Turn the <O> dial to select <G_>,
then press <_>.
® Turn the <O> dial to select the
number of copies, then press <:_ >.
_7 Start printing.
® Turn the <O> dial to select [Print],
then press <_>.
_, The printing will start.
You can also print RAW and sRAW images taken o7 the camera.
With RAW+JPEG images the RAW image witl be printed. And with
sRAW+JPEG images, the JPEG image will be printed.
For details on trimming see page 145.
The [Default] sett ng for printing effects and other options are the
orinter's own default settings as set by the pnnter's manufacturer. See
me pnnter's ms[rucuon manual to find out what the [Default] settings are.
Depending on the image's file s_ze and recoramg quahty, _t may taKe
some time for the printing _o s_ar_ after you select [Print].
If image bit correction (p.145_ has been applied, it wiii take longer _opnn-[
the image
After me [Do not disconnect cable] message disappears, you can
disconnect the cable even during printing.
To stop the printing, press <_> while [Stop] is displayed, then selecl [OK].
143