The LCD monitor can be used to compose images while
shooting, adjust settings menus and replay images.
The image in the LCD monitor may darken when the
monitor is used under sunlight or other strong lighting.
This is net a defect.
Shooting
Mode
Pressing
the DISP. button
cycles
the LCD monitor
to the
next mode
each time the button
is pressed.
Standard
•
Detailed
(No Information)
(Information
View)
_]
_
_
_
_
_
•
_
_
_
_
_
_
_
_
_
_
_
•
_
_pl _
_
_
_
•
_
• The on/off setting of the LCD monitor dis
ay mode is
memorized
when the camera is turned off. When the
camera is turned on again it assumes the last mode.
However, when the LCD monitor is turned on and the
"Change the Battery Pack" message appears, the LCD
monitor may not automatically
turn on the next time the
camera is started.
• When the LCD monitor is set to Standard
or Off,
shooting
information
appears for approximately
6
seconds (The shooting information
may net appear
depending
on the setting contents of the camera at that
moment.)
• Setting the mode dial to _
or_,_, modes turns the LCD
monitor on regardless of whether it is set to on or off.
33
o
u_
rn
0
t_
EL