You can make clear
prints
swiftly
and easily when
you
connect
the camera
to an optional
direct
print function
compatible
printer
(CP Series)
or a direct
print function
compatible
Bubble
Jet printer
(sold separately).
It can also
be used with
DPOF
print
settings.
You are recommended
to use the optional AC Adapter
Kit
ACK600 (p. 195) to power the camera when it is con-
nected to the printer or else load fully charged NiMH
batteries (p. 193) or unused alkaline batteries.
.................
;0,; ........
• Please refer to the System Map su
ed with your
camera for direct print function compatible
printer (CP
Series) information.
• Please see your printer's user guide for instructions
on
loading paper and installing ink cartridges.
ing
Two direct interface cables are supplied with the printer.
Use the cable (DIF-100) that has a .'_ symbol on the
connector to connect to this camera.
I
Turn off the camera (p. 30).
2
Attach the power cable to the printer and
plug the other end into power supply, or
install the printer's rechargeable
battery.
Depending on the type of printer you have, it may or may
not use rechargeable
batteries. Refer to your printer's user
guide.
140