Canon POWERSHOT A3100IS User Manual page 131

List of Messages That Appear on the Screen ;_
Cannot magnify!/Cannot rotate/Cannot modify image/Unselectable
image,
Incompatible images cannot be magnified (p. 96), rotated (p. 105), edited
(pp. 106 - 108), or added to a print list (p. 112).
Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not be magnified, rotated, edited,
or added to a print list.
Movies cannot be magnified (p. 96).
invalid selection range
When choosing the selection range (pp. 99, 102, 105), you tried to choose a
starting image that was after the last image or you tried to choose an ending
image that was before the starting image.
Exceeded selection limit
You chose more than 998 images in print settings. Choose less than 998
images (p. 112).
Print settings could not be saved correctly. Reduce the number of selected
images and try again (p. 112).
You chose 501 or more images in Protect (p. 98), Erase (p. 101), Favorites
(p. 103)or My Category (p. 104).
Communication error
Images could not be transferred to the computer or printed due to the large
amount of images (approx. 1000) stored on the memory card. Use a
commercially available USB card reader to transfer the images. Insert the
memory card into the printer's card slot to print.
Naming error!
The folder or image could not be created because there is an image with tile
same file name as the folder or image that the camera is attempting to create, or
the highest possible file number has already been reached. In the _I' menu,
change [File Numbering] to [Auto Reset] (p. 118) or format the memory card
(p. 22).
Lens Error
This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
If this error message continues to appear, contact a Canon Customer Support
Help Desk as there may be a problem with the lens.
A camera error was detected (Error number)
If an error code appears directly after taking a picture, tile shot may not have
been recorded. Check the image in Playback mode.
If this error code reappears, note the Error number (Exx) and contact a Canon
Customer Support Help Desk as there may be a problem with the camera.