Trimming - Canon POWERSHOT A3100IS User Manual

Trimming
You can cut out a portion of a recorded image and save it as a new image
file.
Choose [Trimming].
_ Press the MENU button, choose the [] tab
and [Trimming], then press the @ button.
2 Choose an image.
_, Press the _ buttons to choose tbe image
and press the @ button.
Adjust the trimming area.
_. A frame will appear around the portion of the
image to be trimmed.
_. The original image will display in the upper
left and the trimmed image will display in the
lower right.
_, If you press the zoom button to the left or
right, you can change the frame size.
_, If you press the A'_4 _ buttons, you can
move the frame's position.
_, If you press the DISR button, you can
Recorded pixels
after trimming change the frame orientation.
_, In an image with detected faces, gray
frames appear around the faces located in
the upper left image. The frames can be
used for trimming. You can switch between
frames by pressing the Z_Zbutton.
_ Press the @ button.
Save as a new image and display.
_ Follow Steps 4 - 5 on p. 106.
Image s with a recording pixel setting 0f s or _, o[ images resized
as XS Caun0t be edited.
! The Width and height ratio 0fan !range that Can be Changed is fixed a!
4:3 (for a vertica! image 3:4):
The number Of recorded pixeis in a trimmed image will be smaller than
} before trimming.
Trimming Area
Trimming Area Display