Selecting The Playbackstarting Point - Canon VIXIA HFR11 Instruction Manual

(_ NOTES
• When an external microphone is connected to the camcorder, _ _
[Wind Screen] will automatically be set to [_ Off ..-.4/{1
OF_" J'
• If the audio level is too high and the sound gets distorted, turn on the
microphone attenuator with the IBm!_ [Microphone Attenuator] setting
or adjust the audio recording level manually (LT.3 68).
Selecting the PlaybackStarting Point
If you have a very long scene, you may
want to start playing back the scene
from a certain point. You can use the
movie timeline to break the scene to
segments at fixed time intervals rang-
ing from 6 seconds to 6 minutes. If you recorded movies with the Face
Detection function (L_3 62) activated, you can display the scene divided
into segments every time the camcorder registered a change in the
main subject of the scene.
Operating modes: 1
MovieTimeline
1 Open the original movies or playlist index screen.
• _i_/_ You can select the original movies in the built-in memory
or on the memory card.
• To open the playlist index screen from the original movies index
screen:
- _(!_l/l_lJlJJ_ For scenes in the built-in memory, press ii_E2_EE
For scenes on the memory card, press
INDEX SEL.;
and then select
[Playlist].
- _ Press _L:AY_tS]- .
2 Select (_T, _11_) the scene you want to view and press DI_DISR/.
• The [Timeline] screen appears. The large thumbnail will show the first
frame of the scene. Below it, the timeline ruler shows frames taken
from the scene at fixed intervals.
• Press (_i_R again to return to the index screen.
Video * 71