On-Screendisplays And Data Code - Canon VIXIA HFR11 Instruction Manual

• Faders cannot beused when r ecording video snapshot scenes orwhen
pre-recording isactivated.
On-ScreenDisplays and Data Code
You can turn most on-screen displays on or off.
Operating modes :1_' : ;:
Repeatedly press [iJ)si_] to turn the on-screen displays on/off in the
following sequence:
mode:
* All displays on
• Most displays off*
mode:
• All displays on
• Data code only
• All displays off
mode:
° All displays on
• Regular displays only (removes the histogram and information icons)
• All displays off
* Pressing _ will turn off most of the icons and displays the1appears automati-
cally but will not removeonscreen displays that were turned on manually(for
example,onscreen markers, the audio levelmeter or the joystick guide).
About the Data Code ]
:With eve_ scene 0r photo recorded, the Cam:corder keeps a data code
(date!time of recording, nformation about the camera setup, etc ). In :
mode, this information is displayed on the bottom bar and as
information cons n _ mode, you can se act the information to be
displayed wi_h the_ ¢ [Uaialoodel se_tingl
Video •
67