Troubleshooting - Canon VIXIA HFR11 Instruction Manual

Troubleshooting
If you have a problem with your camcorder, refer to this section. Some-
times what you think is a malfunction of the camcorder may have the
simplest of solutions - please read the "CHECK THIS FIRST" box
before going on to the more detailed problems and solutions. Consult
your dealer or a Canon Service Center if the problem persists.
CHECK THIS FIRST
Power supply
• Is the battery charged? Is the compact power adapter correctly con-
nected to the camcorder? (L_ 21)
Recording
• Did you turn the camcorder on and correctly set it to recording mode?
(C13 27) If you are recording on a memory card, is one correctly
inserted into the camcoder? (q3 36)
Playback
• Did you turn the camcorder on and correctly set it to playback mode?
(C[3 45, 89) If you are playing back recordings from a memory card, is
one correctly inserted into the camcorder? (L_ 36) Does it contain any
recordings?
Power source
Thecamcorder will not turn on or it turns off by itself.
- The battery pack is exhausted. Replace or charge the battery pack.
- Remove the battery packand reattach it correctly.
Cannot charge the battery pack.
- Make sure the camcorder is off so charging can start.
- The temperature of the battery pack is outside the charging range. If the battery pack'stem-
perature is below 0 °C (32 °F),warm it before charging it; if it is above 40 °C(104 °F), let the
battery pack cool clownbefore charging it.
- Chargethe battery pack in temperatures between 0 °C and 40 °C (32 °F and 104 °F).
- The battery pack is faulty. Replacethe battery pack.
A noise can be heard from the compact power adapter.
- A faint sound can be heard while the compact power adapter is connectedto a power outlet.
This is not a malfunction.
The battery pack is exhausted extremely quickly even at normal temperatures.
- The battery may have reachedthe end of its battery life. Buy a new battery pack.
Additional Information €
147