Selecting The Focusing Point - Canon MVX150i Instruction Manual

5_D74PAL_E(100-138)
3. Press the PHOTO button fully.
• F disappears and you hear a shutter sound.
• The card access indicator flashes and the card access display
appears.
• The still image shown on the screen will be recorded on the memory card.
❍ To use the self-timer (
❍ If the subject is not suitable for autofocus, the focusing frame turns yellow and
❍ The focusing frame gives an indication of the focusing point. Depending on the
❍ When the subject is too bright (overexposed), "OVEREXP" starts flashing. If
❍ "OVEREXP" does not appear when you press the EXP button.

Selecting the Focusing Point

CAMERA
1. Set the camcorder to CARD CAMERA mode.
A white focusing frame appears in the centre of the screen.
2. Set the program selector to Q.
3. Turn the selector dial to display all focusing frames.
Three focusing frames appear on the screen, one of it in green.
4. Turn the selector dial to select the focusing point.
Turn the selector dial up to select the frame to the right, down
to select the frame to the left.
5. Record the still image.
❍ If you operate the zoom lever, press the EXP button or do not press the PHOTO
Downloaded From CamcorderManual.com Canon Manuals
03.2.11 10:13 AM
and press the PHOTO button fully.
locks the focus. The confirmation sound beeps once. Adjust the focus manually
with the focus ring.
size of the subject or the distance, the camcorder may focus outside the frame.
you have turned off the built-in ND filter, we recommend changing the setting
back to AUTO. Open the menu and select [CAMERA SET UP]. Select [ND
FILTER], set it to [AUTO] and close the menu.
PLAY (VCR)
button within 4 seconds, the frames other than the selected one disappear.
Page 105
67), press the (self-timer) button before step 2
CARD CAMERA
E
CARD PLAY (VCR)
FINE
50
FINE
50
FINE
50
105