Installing In The Push-Tractor Position-Installing - Epson 5000+ User Manual

Installing in the push-tractor position
1.
Make sure the printer is turned off. Lift the printer cover and
the paper guide up and off the printer.
2. If necessary, remove the tractor from the pull-tractor position
by pressing the lock tabs open while lifting the tractor up
and out of the mounting slots.
Press open the tractor's lock tabs. Hold the tractor
3.
horizontally above the printer and lower it straight down
into the printer's back mounting slots.
When the tractor is positioned in the mounting slots, release
4.
the lock tabs.
5. If you removed the clear plastic paper-tension unit
previously, replace it by placing it on the printer's
mounting pegs; then lower into place. Press on both ends
of the paper-tension unit until you feel it click into place.
Replace the printer cover.
6.
7. Move the paper-release lever to the push-tractor position.
You are now ready to load continuous paper with the push
tractor. See page 2-12 for instructions.
Paper Handling
2-10