Epson 5000+ User Manual page 49

24-pin dot matrix printer
Hide thumbs Also See for 5000+:
Table of Contents

Advertisement

Installing in the pull-tractor position
Make sure the power is turned off. Remove the paper guide.
1.
Raise the paper-guide cover and rest it on the printer cover.
Lift the printer cover up and off.
2.
Grasp both ends of the clear plastic paper-tension unit and
lift it up from the front and lift it off the printer.
3.
If necessary, remove the tractor from the push-tractor
position by pressing the lock tabs open while lifting the
tractor up and out of the mounting slots.
4.
Push the tractor's lock tabs into the open position. Tilt the
tractor forward and lower it into the printer's front
mounting slots. An arrow on each side of the mounting
slots shows you where to align the tractor.
5.
When the tractor is positioned in the mounting slots
the lock tabs.
Pull the paper-release lever forward to the pull-tractor
6.
position.
You are now ready to load continuous paper. See page 2-15 for
instructions.
, release
Paper Handling
2-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Actionprinter 5000+

Table of Contents