Epson 5000+ User Manual page 107

24-pin dot matrix printer
Hide thumbs Also See for 5000+:
Table of Contents

Advertisement

Pull out on the gear at the right side of the pull tractor and
8.
turn it to remove any slack in the paper between the push
and pull tractors.
Place the notches on the paper guide straight down over the
9.
mounting posts on the printer.
Slide both edge guides to the middle of the paper guide.
10.
Slightly lift the paper guide and then lower it until it rests
on the printer.
11.
Replace the Printer cover by inserting the front tabs into the
slots on the printer and then lowering the cover into place.
Raise the paper guide cover and rest it on the paper guide.
Note:
When you want to print several pages of continuous paper, fold the
first page foward at the perforation after the perforation emerges from
below the printer cover. This helps the printer feed the printed pages
properly and prevents paper jams.
Using Printer Options
4-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Actionprinter 5000+

Table of Contents