Toshiba E-STUDIO 2500C Scanning Manual page 42

3 Scan to File or USB
[COMMAND PORT]
Press this to enter the port number to be used for command. Generally "-" is entered for
the command port. When "-" is entered, the port number that is set by the administrator
will be used. Change this option only when you want to use another port number.
When you press each button, the letter entry screen is displayed. Enter the value using
the keyboard and digital keys, and press the [ENTER] button to set the entry.
When you want to store the data using SMB, select the [SMB] but-
ton and specify the following items as you require. Then press the
[ENTER] button.
[NETWORK PATH]
Press this to enter the network path to the folder where you want to store the data.
[LOGIN USER NAME]
Press this to enter the user name to access the network folder if required.
[PASSWORD]
Press this to enter the password to access the network folder if required.
When you press each button, the letter entry screen is displayed. Enter the value using
the keyboard and digital keys, and press the [ENTER] button to set the entry.
[SERVER NAME] and [COMMAND PORT] are not required to set when selecting the
[SMB] button for protocol.
40 How to Perform Scan to File or USB