Table of Contents
Advertisement
11.4
Configuring the Client PC
All configuration takes place in the Emergency Agent Window on the Client PC for descriptions and locations of the
buttons and features of the Emergency Agent window Refer to the Emergency Agent Window section later in this
chapter.
1)
Open the Emergency Agent window on the Client PC.
Start >Programs > Toshiba > Emergency Agent > Emergency Agent
2)
Click New in the DVR List and enter the site code, site name, and IP Address of the DVR you wish to connect to in
the Site Edit window that opens. Click Save
3)
Click the Tools menu and select Setup.
4)
Confirm that the Listen Port in the Configuration Window is set to the same number as the Emergency Port in
Communication Settings on the DVR. If the numbers are different adjust the Listen Port on the client PC to
match the DVR.
5)
Click Enter
6)
Reboot the Clint PC
97
Advertisement
Table of Contents
