Operating The Remote Control - Soleus Air SG-TTW-10ESE Operating Instructions Manual

OPERATING THE REMOTE CONTROL

•
Press the ON/OFF button to turn the
A/C on or off. When the unit is turned
off, the Timer and sleep functions will be
cancelled. The set temperature will be
saved.
•
Press the MODE button to change the
operating mode. You can choose AUTO,
COOL, SAVE (energy saver), or FAN
only. The temperature will not be
displayed when AUTO mode is selected.
NOTE: Make sure there are no obstructions between the receiver on the A/C and the
remote control. Do not drop or throw the remote control. Do not allow water to get
inside the remote control and do not place the remote control in direct sunlight or a
place where it is very hot.
•
Press the SLEEP button to turn SLEEP
mode on or off. SLEEP mode is set to
off automatically. When SLEEP mode is
selected the timer can be adjusted.
SLEEP mode is not available in Fan or
Auto mode.
•
Press the FAN button to turn change
the FAN options. You can choose be-
tween four speeds and auto mode. The
fourth fan option is only available in
cooling and energy saver modes.
•
Swing mode is not available on this
model
10