Installing The Roll Paper Cutter And Basket - Epson 2200 Printer Basics Manual

Installing the Roll Paper Cutter and Basket

1. Turn off the printer.
2. Press the lever on the left side of the
output tray, then gently guide the tray
off its mounting tabs, left side first.
3. Insert the cutter into the top of the
opening as shown, and press it in
evenly on both sides, until it clicks
into place.
4. Position the basket as shown, and
slide it onto the guide rails on the
bottom of the cutter.
Caution: Don't install the
basket if you're printing photos
longer than 11.7 inches; this
may cause a paper jam. The
basket holds 40 photos, up to
7 inches long. For longer
photos, remove each one after
it's printed.
5. If the cloth on the basket isn't attached at both ends, lift the free edge of the cloth
over the basket frame and attach the loops to the hooks on the frame.
Lever
Loading Paper
15