HP ProLiant SL165z - G6 Server Configuration Manual page 33

Table 20
POST Error Messages
Error code Error message
211 Keyboard error
212 Keyboard Controller
Failed
281 Memory size found by
POST differed from
CMOS
60D Power Supply Failure or
Power Supply
Unplugged
60E Power supplies
mismatch, replace
slot#2 with identical
Power supply
Press F1 to continue
booting with one power
supply
604 System Fan 1 Missing
605 System Fan 2 Missing
606 System Fan 3 Missing
607 System Fan 4 Missing
60F Fan Solution Not
Sufficient!
614 Uncorrectable Memory
ECC Error
616 Uncorrectable Memory
ECC Error - DIMM_J8
617 Uncorrectable Memory
ECC Error - DIMM_J7
618 Uncorrectable Memory
ECC Error - DIMM_J10
Description/corrective action
Keyboard not working.
Verify that the keyboard cable is securely connected to the keyboard
port (not the mouse port) on the rear panel of the server.
If the problem persists, replace the keyboard or contact your HP
Customer Support provider.
Keyboard controller failed test.
The user has added or removed a memory module, thus a memory size
that is different from the previous boot up.
Check if not plug the power cable
Re-plug the power supply
Replace the power supply with another one
When more then one power supply is installed in a system, and these
power supply are mismatch then this Error Message will be display and
Halted the system ,don't allow the system to boot in this case.
Fan1is broken or not well connected, re-plug it or replace it with
another one
Fan2 is broken or not well connected, re-plug it or replace it with
another one
Fan3 is broken or not well connected, re-plug it or replace it with
another one
Fan4 is broken or not well connected, re-plug it or replace it with
another one
Please check the system fans' status as the above error code.
If the system can't source which DIMM has ECC faults, the system will
show this error.
There is one Uncorrectable Memory ECC Error occurred on the DIM_J8
during the system running last time. Replace this DIMM with another
one.
There is one Uncorrectable Memory ECC Error occurred on the DIM_J7
during the system running last time. Replace this DIMM with another
one.
There is one Uncorrectable Memory ECC Error occurred on the
DIM_J10 during the system running last time. Replace this DIMM with
another one.
Contents 33