HP ProLiant SL165z - G6 Server Configuration Manual page 17

Table 10
Serial Port Configuration submenu fields
Field
Serial Port Assignment
Serial Port Switching
Serial Port Connection
Mode
Figure 13 LAN Configuration submenu
Table 11
LAN Configuration submenu fields
Field Description
Share NIC Mode Setting this value will prevent support from share NIC mode
Setting this value will allow support share NIC mode.(Disabled the
KVM).
DHCP IP Source Setting this value will allow dynamic IP assignment.
Setting this value will allow manual IP assignment.
Description
This setting will assign the serial port connector to the system. This is
the default setting.
This setting will assign the serial port connector to the BMC
(Baseboard management controller).
This setting allows the Serial port switch between system and BMC.
This is the default setting
This setting will prevent the Serial port from switching between
system and BMC.
Serial port connection mode is Direct. This is the default setting
Serial port connection mode is Modem
Options
System
BMC
Enabled
Disabled
Direct
Modem
Options
Disabled
Enabled
Enabled
Disabled
Contents 17