Figure 22
Boot Menu
Table 17
Boot Menu fields
Field
Boot Device Priority
Embedded NIC Port 1
PXE
Embedded NIC Port 2
PXE
USB Device Boot
Priority
Embedded NIC Port2
Control
Wake-On LAN
Boot Device Priority submenu
To change the boot order, select a boot category type such as Hard disk drives, Removable media
or ATAPI CD ROM devices from the boot menu. For example, if the 1st boot device is set to Hard
disk drives, then BIOS will try to boot to hard disk drives first.
Description
Use this screen to specify the order in which the system checks for the device to boot
from. To access this screen, select Boot Device priority on the Boot setup screen and
press <Enter>, the following screen displays.
The option specifies the embedded NIC Port 1 PXE .the default is enabled.
The option specifies the embedded NIC Port 2 PXE .the default is disabled.
USB Device Boot Priority as "High" or "Low", "High" means that the
Set the
USB Device Boot Priority is higher than Hard Drive.
Disable or Enable the embedded NIC port2.
Disable or Enable the Wake on LAN function of the system.
Contents 24