Enabling Wpa Security - Epson PowerLite 1705c User Manual

8. Check with your network administrator for directions on entering
a key for your network, and follow these general guidelines:
For 128 bit WEP encryption with hexadecimal input, enter
■
26 characters, from 0 to 9 and from A to F.
For 64 bit WEP encryption with hexadecimal input, enter 10
■
characters, from 0 to 9 and from A to F.
For 128 bit WEP encryption with ASCII or text input, enter
■
13 alphanumeric characters.
■ For 64 bit WEP encryption with ASCII or text input, enter 5
alphanumeric characters.
9. When you're done making these settings, highlight the
button at the top of the screen, then press
and press
Complete
save your settings and return to the main EasyMP screen.

Enabling WPA Security

1. Press . Highlight
Menu
2. Choose
To Network Configuration
3. Highlight
Security
You see the following screen:
, then choose
Enter Yes
and then press
Network
and press
, then press .
Enter
Return
. Choose
Enter Setup
and press to
Enter
.
Enter
.
Enter
Presenting Through a Wireless Network
69