Selecting Wireless Network Settings In Windows; Selecting Wireless Network Settings In Mac Os X; Enabling Wpa Or Eap Security - Epson PowerLite 1940W User Manual

Selecting Wireless Network Settings in Windows

Selecting Wireless Network Settings in Mac OS X

Enabling WPA or EAP Security

Downloaded From projector-manual.com
9. Select a WPA or EAP setting from the drop-down menu.
10. Select the settings on the security menu as necessary for your network.
11. When you finish selecting settings, select Setup complete and follow the on-screen instructions to
save your settings and exit the menus.
Parent topic: Wireless Network Projection
Before connecting to the projector, select the correct wireless network on your computer.
1. To access your wireless utility software, double-click the network icon on the Windows taskbar.
2. Do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the SSID you assigned to the projector.
3. Click Connect.
Parent topic: Wireless Network Projection
Before connecting to the projector, select the correct wireless network in Mac OS X.
1. Click the AirPort icon on the menu bar at the top of the screen.
2. Make sure AirPort is turned on, then do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the SSID you assigned to the projector.
Parent topic: Wireless Network Projection
Set up the WPA or EAP security settings to match your network's settings. Check with your network
administrator for guidance on entering the correct information.
56