Starting The Projector With A Password - Epson PowerLite 1705c User Manual

The countdown for the elapsed time begins as soon as you close
the Password Protect menu. (You can check the elapsed time in
this menu next to
10. To enable your screen logo, select
. Select and press
Enter On
When this feature is on, the logo appears whenever you turn on
the projector (if the
menu; see page 124). It also appears when you press the A/V
Mute button (if you selected the
under Display in the Extended menu). None of the User's Logo
features in the Extended menu can be changed when the User's
Logo Protect function is enabled.
11. To enable network setting protection, select
and press . Select
Enter
When this feature is on, none of the network settings on the
Configuration menu can be changed.

Starting the Projector with a Password

When the password function is enabled, you see this screen when you
plug in and turn on the projector:
Hold down the button on the remote control and use the
Num
numeric keypad to enter the four digit password.
The password screen closes, the numeric keypad is automatically
deactivated, and projection begins.
.)
Time elapsed
User's Logo Protect
.
Enter
is enabled in the Extended
Startup Screen
for the A/V Mute setting
Logo
and press
On Enter
and press
Network Protect
.
Fine-Tuning the Projector
123