B Regulatory Compliance; Safety Regulations; Place Battery Marking - Intel DG965OT - Desktop Board Motherboard Product Manual

B Regulatory Compliance

This appendix contains the following regulatory compliance information for Desktop
Board DG965OT:
•

Safety regulations

• European Union Declaration of Conformity statement
• Product Ecology statements
• Electromagnetic Compatibility (EMC) regulations
• Product certifications

Safety Regulations

Desktop Board DG965OT complies with the safety regulations stated in Table 15 when
correctly installed in a compatible host system.
Table 15. Safety Regulations
Regulation
UL 60950-1:2003/
CSA C22.2 No. 60950-1-03
EN 60950-1:2002
IEC 60950-1:2001, First
Edition

Place Battery Marking

There is insufficient space on this desktop board to provide instructions for replacing
and disposing of the Lithium ion coin cell battery. For system safety certification, the
statement below or an equivalent statement is required to be permanently and legibly
marked on the chassis near the battery.
CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.
Related Links
For information about replacing the battery, go to page 53.
Title
Information Technology Equipment – Safety - Part 1: General
Requirements (USA and Canada)
Information Technology Equipment – Safety - Part 1: General
Requirements (European Union)
Information Technology Equipment – Safety - Part 1: General
Requirements (International)
73