Epson Stylus CX3100 Copy Manual page 32

c
Caution:
You must remove the yellow tape seal from the cartridge
before installing it; otherwise, the cartridge becomes
unusable and copying is not possible.
If you have installed an ink cartridge without removing
the yellow tape seal, you must remove the cartridge and
install a new one. Prepare the new cartridge by removing
the yellow tape seal, and then install it in this product.
Do not remove the blue portion of the tape seal from the
top of the cartridge; otherwise, the print head may become
clogged and copying is not possible.
Do not remove the tape seal from the bottom of the
cartridge; otherwise, the ink may leak.
Be sure to always install an ink cartridge into this
product immediately following the removal of an old ink
cartridge. Failure to promptly install the ink cartridge
may cause the print head to dry out and render it unable
to function properly.
Do not touch the green IC chip on the side of the
cartridge; otherwise, normal operation and copying may
not be possible.
If you need to remove an ink cartridge temporarily from
this product, be sure to protect the ink supply area of the
Do not touch this part.
Replacing Ink Cartridges
3
3
3
3
3
3
3
3
3
3
3
3
25