Setting Up Your Universal Remote - GE RM94903 Instruction Manual

94903 Revised Size 1/21/02

Setting Up Your Universal Remote

Place batteries in the remote
1. Remove the battery compart-
ment cover.
2. Place two AAAbatteries as
shown, matching the + and –
end of each battery as indi-
cated in the battery compart-
ment.
3. Replace the cover.
Determine if your remote needs programming
(Some RCA, GE and ProScan devices may already be
pre-programmed. )
1. Press the button of the device
you want to control (for
example TV).
2. If the device turns on, press
another button to confirm
(for example
CHANNEL UP).
3. If the device you selected
(TV) responds, you will not
need to program the remote.
If the device you selected
(TV) does not respond, you
will need to program the
remote.
4. Repeat steps 1-3 for other
devices.
2/25/02 4:26 PM
3
Page 4