Identifying Codes From Your Universal Remote - GE RM24973 Instruction Manual

Identifying Codes From Your
Universal
If you need to find the three-digit code for
your device after your device is set-up, use
this procedure.
1. Press and hold SETUP
until the INDICATOR
LIGHT
release SETUP.
2. Press
the
ton for the code you
are retrieving.
I N D I C ATO R L I G H T
will blink once.
3. Press and release SETUP.
The
LIGHT will turn blink
and remain lit.
4. Starting with 0 on the
keypad, press the num-
ber buttons in order (0-
9) until the INDICATOR
LIGHT blinks.
5. The
causes the INDICATOR
LIGHT to blink is the
first digit of your code.
6. Repeat Step 4 until
you have retrieved all
three numbers in the
code. The INDICATOR
LIGHT will go off after
the third number is retrieved.
Remote
lights,
and
device
INDICATOR
number
then
release
but-
The
which
11