Installation Precautions; Prevent Power Supply Overload; Observe Safety And Regulatory Requirements - Intel DBS1200KP Product Manual

Installation Precautions

When you install and test the Intel
installation instructions.
To avoid injury, be careful of:

Sharp pins on connectors

Sharp pins on printed circuit assemblies

Rough edges and sharp corners on the chassis

Hot components (such as processors, voltage regulators, and heat sinks)

Damage to wires that could cause a short circuit
Observe all warnings and cautions that instruct you to refer computer servicing to qualified
technical personnel.

Prevent Power Supply Overload

Do not overload the power supply output. To avoid overloading the power supply, make sure that
the calculated total current loads of all the modules within the computer is less than the output
current rating of each of the power supplies output circuits plus enough headroom for server board
power consumption.

Observe Safety and Regulatory Requirements

Read and follow the instructions in this section and the instructions supplied with the chassis and
associated modules. If you do not follow these instructions and the instructions provided by the
chassis and module suppliers, you increase your safety risk and the possibility of noncompliance
with regional laws and regulations. If the instructions for the chassis are inconsistent with these
instructions or the instructions for associated modules, contact the supplier to find out how you can
ensure that your computer meets safety and regulatory requirements.
®
Intel Server Board S1200KP Product Guide
Installing and Replacing Server Board Components
®
Server Board, observe all warnings and cautions in the
19