Connecting To The Internal Headers; Chassis Intrusion Header; Figure 18. Internal Headers; Table 4. Chassis Intrusion Header Signal Names - Intel DBS1200KP Product Manual

Installing and Replacing Server Board Components

Connecting to the Internal Headers

Before connecting cables to any of the internal headers, observe the precautions in "Before You
Begin" on page 18. Figure 18 shows the location of the internal headers and connectors on Intel
Server Board S1200KP.

Chassis Intrusion Header

Figure 18, A shows the location of the chassis intrusion header. This header can be connected to a
mechanical switch on the chassis to detect if the chassis cover is removed. This switch should be in
the open position when the chassis cover is installed and closed when the cover is removed.
Table 4 shows the pin assignments and signal names for the chassis intrusion header.
34

Figure 18. Internal Headers

Table 4. Chassis Intrusion Header Signal Names

Pin Description
1 Ground
2 Intruder#
®
Intel Server Board S1200KP Product Guide
®