Rear Panel - Stanton SMX.311 User Manual

3.2 rear Panel (Figure 3.2)
Figure 3.2
17. Power Switch: Turns the mixer ON or OFF.
18. Power Connector: While the power is switched OFF, plug the power supply into the mixer first, and then plug it into the outlet.
19. booth output: Using a RCA cable, connect from the SMX.311 booth output to the DJ booth monitor system inputs.
20. balanced Master output: TRS balanced (1/4") connectors are typically used to connect to a P.A. mixer or an amplifier for live
performances, or a recording console.
21. Unbalanced Master output: RCA connectors are typically used to connect to a home stereo, or to another mixer with RCA
inputs for practicing or team routines.
22. line inputs: Unbalanced RCA jacks for connecting stereo audio from line level sources such as CD players, Hi-Fi VCRs, cassette
decks, DAT machines, laser discs, tuners, Mini Discs, even synthesizers or other mixing consoles. Plug mono audio sources into
both Left and Right inputs using a "Y" cable connector.
23. Phono inputs: Plug your turntables in here. When these connectors are used, your signal is fed directly to the high-quality
RIAA phono pre-amplifiers. Only connect turntables here. Line level sources will overload the sensitive phono pre-amps and
will cause distortion.
24. gnD: To eliminate electrical hum, connect the ground cable from your standard turntable ground post to the SMX.311 ground
terminal. Some turntables (like the Stanton STR8.150) do not require a grounding wire.
SMX.311 Description (rear Panel)
5