Quick Setup Diagram - Stanton SMX.311 User Manual

Quick Setup Diagram

2. Quick Setup Diagram
Review this setup diagram. (Figure 2.1) Make sure all faders are at "zero" and all devices are OFF. First, connect all input sources
and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power
amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything ON.
important: Always switch ON your audio input sources such as turntables or CD players first, then your mixer, and finally any
amplifiers. When turning OFF, always reverse this operation by turning off amplifiers, then your mixer, and then input devices.
Figure 2.1
2