Specifications - Stanton SMX.311 User Manual

Specifications
input / output impedance & sensitivity:
Line
Phono
Mic
Master
Master Bal (Load=600 ohm)
Phones (Load=32 ohm)
Channel balance:
frequency response: (Master output, eQ flat)
Line
Phono
S/n ratio: (Maximum gain, eQ flat, W/20 kHz lPf, a-weighted)
Line
Phono
Mic
THD + n: (Master 0 dbV output, Maximum gain, W/20 kHz lPf)
Line
Phono
Mic
Note: 0 dBV=1V rms
Crosstalk:
Line
Channel eQ:
Hi
Mid
Low
Power Source:
Dimensions (H x W x D):
Weight:
47k ohm /-14 dBV +/-0.1 dB (200mV)
47k ohm /-50 dBV +/-0.1 dB (3.16mV)
10k ohm /-54 dBV +/-0.1 dB (2mV)
1k ohm /0 dB (1V) +/-2 dB
600 ohm /+4 dBm (1.23V) +/-2 dB
33 ohm / 0 dBV (1V) +/- 2 dB
Within 3 dB
20-20 kHz +/- 2 dB
20-20 kHz +2/-3 dB (RIAA)
Less than -87 dBV
Less than -70 dBV
Less than -60 dBV
Less than 0.02% 20-20 kHz
Less than 0.15% at 1 kHz (A-weighted)
Less than 0.15% at 1 kHz (A-weighted)
More than 65 dB at 1 kHz between L and R.
More than 70 dB at 1 kHz between Channels.
9 +/- 2 dB at 13 kHz
-15 +/- 3 dB at 13 kHz
9 +/- 2 dB at 1 kHz
below -23 dB at 1 kHz
9 +/- 2 dB at 70 Hz
below -23 dB at 70 Hz
DC 6V
100 mm x 254 mm x 308 mm
3.1 kg (w/o power transformer)
10
Specifications