Table of Contents
Advertisement
Multipoint
With the multipoint feature, you can use the headset with two different phones at the same
time. Before you use this feature, you need to enable it.
To enable the multipoint feature
1
Make sure the headset is turned off.
2
Press and hold down
alternately.
3
Multipoint mode: Press and hold down the plus sign on the volume key. Two orange
flashes on the indicator light shows that multipoint has been enabled.
4
Singlepoint mode: Press and hold down the minus sign on the volume key. One
orange flash on the indicator light shows that singlepoint has been enabled.
When the headset is in multipoint mode, you cannot answer a second call on the same phone.
This is an Internet version of this publication. © Print only for private use.
on the headset until the indicator light flashes green and red
10
Advertisement
Table of Contents
