Sony Handycam DCR-SR20 Handbook page 34

When your TV is monaural (When your TV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the
white (left channel) or red (right channel) plug to the audio input jack of your TV or VCR.

Notes
When you connect your camcorder to a TV compatible with the ID-1/ID-2 system, set [TV TYPE] to

[16:9]. The TV switches to full mode automatically. Refer also to the instruction manuals supplied with
your TV.
When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded image's

aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter.
On some 4:3 TVs, the photos recorded in 4:3 aspect ratio may not be displayed full screen. This is not a

malfunction.
When you play back an image recorded in 16:9 (wide) aspect ratio on a 4:3 TV not compatible with the

16:9 (wide) signal, set [TV TYPE] to [4:3].
Tips

To check information (counter, etc.) on the screen of the monitor, select

others]  [OUTPUT SETTINGS] (under
OUT/PANEL] 
US
34
[GENERAL SET] category)  [DISP OUTPUT]  [V-
 
.
(MENU)  [Show